- +49 (0) 2161 402900
- info(at)e-breathe.de
- Im Abtsfeld 6, 41066 Mönchengladbach
The new overpressure lightweight hoods of the e-breathe Short & Long Hood series offer maximum comfort with the highest level of protection. They feature an attractive, ergonomic design and a soft-fitting face seal made of elastic material that adapts to different face sizes and shapes. The special design makes it possible to wear glasses under the hood without a noticeable, annoying draught.
An adjustable and fixed head support is located inside the hood, which enables immediate use. The hoods were designed for easy on and off. A loop at the front and back of the hood allows it to be adjusted and put down without touching the external material.
In combination with an air source (respiratory protection blower or compressed air control valve), a constant overpressure is built up inside the hood, preventing the penetration of harmful substances and achieving the highest protection class. The airflow passes inside the hood, along the visor, preventing any unpleasant drafts or noise. The excess and used air is exhausted by an exhalation valve positioned close to the mouth, minimizing CO2 concentration and significantly improving communication.
1) Head harness
Thanks to the permanently attached, internal head harness, the hood is ready for immediate use. The lightweight head harness can be adjusted to fit different head sizes and ensures an optimal fit and maximum comfort. The soft headband guarantees a comfortable fit and is replaceable.
2) New design
The newly developed hoods feature a wide and soft face seal. The soft, elastic material of the face seal adapts perfectly to different face sizes and offers maximum wearing comfort and respiratory protection.
3) Polycarbonate visor
The visor offers eye and face protection in accordance with EN 166 F and is ergonomically shaped. It features an extra-large, distortion-free field of vision. A visor protection film is available separately for the premium hoods.
4) Exhalation valve with speech membrane
The exhalation valve offers the safest option for direct exhalation of exhaled air and a low CO2 concentration inside the bonnet. The speech membrane in the exhalation valve facilitates communication. The intelligently designed exhalation valve ensures minimal exhalation resistance and allows the bonnet to be used directly without a G26 occupational health check.
5) Variant: Short Hood – SH
The SH bonnets have no additional shoulder cover and only protect the face and head area. The ears remain uncovered, allowing better perception of ambient noise.
6) Variant: Long Hood – LH
The LH bonnets have an additional head & shoulder cover and offer protection for the entire head and neck area. The cover can be worn inside or outside the protective suit. When worn inside, the suit is supplied with excess air.
7) Air flow
The air distribution within the bonnet has been designed so that the air flow runs directly along the polycarbonate visor. This prevents permanent fogging of the lens and the user does not experience any unpleasant draughts. This ensures greater comfort and minimised noise.
8) Long Hood Neck Seal
The textile neck seal with elastic band ensures that the Long Hood fits perfectly around the neck. It is therefore ideal for people with beards or who wear glasses.
8) Quick Lock Hose Connection
The breathing air hose is securely attached using the new Quick-Lock system on the adapter of the hood.
The short hoods have no additional shoulder cover and only protect the face and head area. The ears remain free and thus allow a better perception of ambient noise.
e-breathe SH1 Limited-Use Hood: Consist of a low-noise, robust, wrinkle- and lint-free material that is disposed of directly after contamination/end of use.
e-breathe SH2 Premium (reusable) Hood: Consist of a low-noise, robust, reusable and water-repellent material. After use, the hood can be cleaned and reused.
Article no. 322001101
Article no. 322000101
Article no. 322001102
Article no. 322000102
The long hoods have an additional head & shoulder cover and provide protection of the entire head and neck area. The cover can be worn inside or outside the suit. Worn inside, the suit is supplied with excess air.
e-breathe LH1 Limited Use Hood:Consist of a low-noise, robust, wrinkle- and lint-free material that is disposed of directly after contamination/end of use.
e-breathe LH2 Premium (reusable) Hood: Consist of a low-noise, robust, reusable and water-repellent material. After use, the hood can be cleaned and reused.
e-breathe LH3 Chemical (reusable): Consist of a low-noise, rugged, wrinkle-resistant, anti-static and chemical-resistant material that is disposed of directly after contamination/end of use.
Article no. 322001111
Article no. 322000111
Article no. 322001112
Article no. 322000112
Article no. upon request
Article no. 322000121
Art. No. 322001996
Art. No. 322002996
Art. No. 322001106
Article no. 322001109
Article no. 322011109
Protective Cover for Air Hose
Article no. 116001041
e-breathe Exhalation valve
Article no. 230103010
Click Adapter
Rings
Article no. 402010002
e-breathe silicone valve leaf
Article no. 322-004045
Article no. 230103009
Article no. 101052692