e-breathe ecoPAD Filtersystem
Because resources are continuously becoming scarcer, more and more focus is placed on the sustainability of products. With the new ecoPAD filter system e-breathe follows this environmentally friendly and goes one step further.
SUSTAINABLE & EFFICIENT: THE ECOPAD SYSTEM ON THE NEW E-FLOW BY E-BREATHE
The e-breathe division developed a reusable filter which was designed with a screw on filter housing to reuse the filter housing and quickly and easily replace the filter fleece. The integrated fleece is exactly the same fleece, which is used in standardized encapsulated filters. The tight fit of the fleece is achieved through a special rubber coating that was developed specifically for the eco-PAD.
The top and the bottom of the filter housing can be connected at once and encloses the particulate fleece firmly. This means that the user has the highest protection against particles and aerosols and the lowest breathing resistance simultaneously.
The new e-Flow from e-breathe integrates the lower part of the filter housing directly onto the „PAD-Box“. The filter fleece is inserted into the integrated housing before using the e-Flow. The fleece will then be firmly closed with the upper part of the filter housing. Depending on the environmental air and the requirements, a particle filter or combination filter can be used.


For more information, please see our product catalog
Construction e-breathe filter system:
Example: Combination filter
1. Filter holder (DIN-RG connection)
2. ecoPAD GF (gas filter medium)
3. gas filter adapter
4. ecoPAD P3 ( particle filter medium)
5. Filter cover


modular exchange of the combination filter:
A modular exchange is possible when used with a combination filter if one filter is saturated. If necessary, only the particle or gas filter can be replaced separately. As a result, only the saturated filter can be replaced and the other filter can be used until saturated.
Space saving:
During the development of the ecoPADs, it was explicitly designed to be particularly flat and light. This means that only about one third of the space that would be required for storing conventional filters is required for storage.
Cost-effective:
The ecoPAD respiratory protection filters do not only score with space and cost savings in logistics and storage, but also protect the environment and material budget due to the reusable, modular design of the filter housing and the longer utilization of the particle or gas filter until saturation.
e-breathe e-Flow with PAD system:
The new e-breathe e-Flow with PAD-Box has an integrated ecoPAD holder directly into the housing. The corresponding ecoPAD is inserted directly into the blower and then closed tightly with the corresponding filter adapters.
The unique concept saves the DIN round thread connection, making the entire unit flatter and lighter. Depending on the ambient air and requirements, a particle, gas or combination filter can be used.


Particle filter (encapsulate)


e-breathe Particle filter P3 R SL (encapsulate)
Art. No. 322-002-109
Protects against solid and liquid particles, radioactive and toxic particles, microorganisms, such as bacteria and viruses.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow & Smartblower
Approved: EN 143, EN 12941, EN 12942
Particle filter ecoPADs


e-breathe ecoPAD P3 R SL (filter medien)
Art. No. 322-002-110 (PU 4)
Protects against solid and liquid particles, radioactive and toxic particles, microorganisms, such as bacteria and viruses.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow & Smartblower
Approved: EN 143, EN 12941, EN 12942
Gas filter (encapsulated)


e-breathe Gas filter ABEK2
Art. No. 322-002-146
Organic, inorganic and acid gases and vapours, as well as ammonia.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN 14387, EN 12941, EN 12942


e-breathe Gas filter A2B2
Art. No. 322-002-148
Organic and inorganic gases and vapours.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN 14387, EN 12941, EN 12942


e-breathe Gas filter A2
Art. No. 322-002-147
Organic gases and vapours, such as solvents, with a boiling point above 65 °C.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN 14387, EN 12941, EN 12942
Gas filter ecoPADs


e-breathe ecoPAD GF ABEK2
Art. No. 322-002-143
Replacement Gas filter PAD:
Organic, inorganic and acid gases and vapours, as well as ammonia.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN 14387, EN


e-breathe ecoPAD GF A2B2
Art. No. 322-002-145
Replacement Gas filter PAD
Organic and inorganic gases and vapours.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN 14387, EN 12941, EN 12942


e-breathe ecoPAD Gasfilter A2
Art. No. 322-002-144
Replacement Gas filter PAD:
Organic gases and vapours, such as solvents, with a boiling point above 65 °C.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN 14387, EN 12941, EN 12942
Combination Filter (encapsulate)


e-breathe Combination filter A2B2E2K2-P3 R SL
Art. No. 322-012-146
Protection against organic, inorganic and acid gases and vapours, as well as ammonia and organic ammonia derivatives, solid and liquid particles harmful to health, such as radioactive and toxic substances and microorganisms.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN143, EN 14387, EN 12941, EN 12942


e-breathe Combination filter A2B2-P3 R SL
Art. No. 322-012-148
Organic and inorganic gases and vapours, solid and liquid particles, radioactive and toxic particles and microorganisms.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN143, EN 14387, EN 12941, EN 12942


e-breathe Combination filter A2-P3 R SL
Art. No. 322-012-147
Organic gases and vapours, such as solvents, with a boiling point above 65 °C, solid and liquid particles, radioactive and toxic particles, and microorganisms.
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: e-breathe e-Flow
Approved: EN143, EN 14387, EN 12941, EN 12942
Filter Accessories


Closing Cap for filter thread
Art. No. 146-042-507
The closing cap for the filter thread protects the thread against dust and dirt.


e-breathe Filter Cover
Art. No. 322-002-131
Screwed onto e-Flow PAD box, filter holder or gas filter adapter to use / seal the ecoPAD P3.


e-breathe Gas Filter Adapter
Art. No. Coming soon
Screwed onto the e-Flow PAD box or filter holder to use / seal the ecoPAD GF.


e-breathe Filter Holder
Art. No. 322-002-128
A DIN round thread connection is required to use the filters with half / full mask or e-Flow filter box.


e-breathe Spark Arrestor Inserts
Art. No. 322-002-138
The spark arrestor inserts are mounted directly into the filter cover and are used for work with flying sparks in order to prevent a filter fire (e.g. welding work).


e-breathe Cover Cap for Filter Cover
Art. No. Coming soon
The cover is clicked into the filter cover and extends its service life. During storage, the cover protects against moisture and dust.


e-breathe Decon Shower Cap
Art. No. Coming soon
The shower cap is clicked onto the filter cover and prevents the penetration of water into the filter during rinsing / decontamination.


e-breathe Pre filter
Art. No. 302-052-691 (20x)
The pre-filter captures coarse particles and extends the life of the particle filter. The prefilter is mounted between the filter and the prefilter holder.
PM Filter


PM Particle filter P3 R / PSL
Art. No. 100-052-676
Protects against solid and liquid particles, radioactive and toxic particles, microorganisms, such as bacteria and viruses
Suitable for:
– Full face mask and Halfmask with DIN round thread
– PAPR: Proflow
Approved: EN 143, EN 12941, EN 12942


PM Combination filter A2-P3 R / PSL
Art. No. 100-043-173
Organic gases and vapours, such as solvents, with a boiling point above 65 °C, solid and liquid particles, radioactive and toxic particles, and microorganisms.
Suitable for:
– Full face mask & Halfmask with DIN round thread
– PAPR: Proflow
Approved: EN 14387, EN 12941, EN 12942


PM Combination filter A2B2-P3 R / PSL
Art. No. 100-043-174
Organic and inorganic gases and vapours, solid and liquid particles, radioactive and toxic particles and microorganisms.
Suitable for:
– Full face mask & Halfmask with DIN round thread
– PAPR: Proflow
Approved: EN 14387, EN 12941, EN 12942


PM Combination filter A2B2-P3 R / PSL
Art. No. 100-043-191
Protection against organic, inorganic and acid gases and vapours, as well as ammonia and organic ammonia derivatives, solid and liquid particles harmful to health, such as radioactive and toxic substances and microorganisms.
Suitable for:
– Full face mask & Halfmask with DIN round thread
– PAPR: Proflow
Approved: EN 14387, EN 12941, EN 12942
Filter Accessories only for PM Filters


Pre filter Set
Art. No. 500-052-693
The closing cap extends the service life of the filter. During storage, the cover protects against moisture and dust.


Cover Cap for PM Filter
Art. No. 302-052-692
The pre-filter captures coarse particles and extends the life of the particle filter. The prefilter is mounted between the filter and the prefilter holder.


Decon Shower Cap
Art. No. 500-580-013
Decon Shower Cap for PM Filter. Prevents the penetration of water into the filter during rinsing / decontamination.


Prefilter Holder + Spark Arrestor
Art. No. 100-052-690
The prefilter holders and metal covers are attached to the filter and are used for work with flying sparks (e.g. welding work).